F02 Fireguard Questions and Answers
1.
Fireguards are required at which of the following locations?
-
A.
Construction sites
-
B.
Marinas
-
C.
Places of Assembly
-
D.
All of the alternatives are correct.
Correct Answer
D. All of the alternatives are correct.Explanation
Fireguards are required at construction sites, marinas, and places of assembly because these locations have a higher risk of fire hazards. Construction sites often involve the use of flammable materials and equipment, making them prone to fires. Marinas have a high concentration of boats and fuel, increasing the risk of fires. Places of assembly, such as theaters or stadiums, have large crowds and complex electrical systems, making them susceptible to fires. Therefore, fireguards are necessary in all of these locations to ensure the safety of people and property.Rate this question:
-
2.
The purpose of conducting fire drills is to:
-
A.
Give employees a break from work.
-
B.
Practice emergency evacuation procedures
-
C.
Make sure the sprinkler system works.
-
D.
Be sure the Fire Department knows where the building is
Correct Answer
B. Practice emergency evacuation proceduresExplanation
Fire drills are conducted to practice emergency evacuation procedures. This helps employees become familiar with the necessary steps to take during a fire or other emergency situation, ensuring their safety and the safety of others. By regularly practicing these procedures, employees can respond quickly and efficiently in the event of a real emergency, potentially saving lives and minimizing damage. It also allows organizations to identify any weaknesses or areas for improvement in their emergency response plans, allowing them to make necessary adjustments and ensure the safety of their employees.Rate this question:
-
3.
In large buildings, fire alarms spacing must not exceed:
-
A.
300 ft
-
B.
200 ft
-
C.
5 ft
-
D.
250 ft
Correct Answer
B. 200 ftExplanation
In large buildings, fire alarms spacing must not exceed 200 ft. This is because fire alarms need to be placed in such a way that they can effectively detect and alert occupants in the event of a fire. By keeping the spacing within 200 ft, it ensures that there are enough fire alarms distributed throughout the building to provide adequate coverage and early warning in case of a fire emergency. This spacing allows for quicker detection and response, increasing the chances of successful evacuation and minimizing potential damage or harm caused by the fire.Rate this question:
-
4.
Double action "Pull Stations" require:
-
A.
One-step operation
-
B.
Breaking the glass
-
C.
Two steps operation
Correct Answer
C. Two steps operationExplanation
Double action "Pull Stations" require a two-step operation. This means that in order to activate the alarm or signal, two separate actions need to be performed. This could involve pulling a lever or handle and then breaking the glass or pressing a button. The purpose of this two-step operation is to prevent accidental activations and ensure that the alarm is only triggered intentionally.Rate this question:
-
5.
Fire Guards are equipped with:
-
A.
Keys to locks
-
B.
Remote controls
-
C.
Walkie-talkie and/or bullhorns
Correct Answer
C. Walkie-talkie and/or bullhornsExplanation
Fire Guards are equipped with walkie-talkies and/or bullhorns in order to effectively communicate with other team members and coordinate their actions during emergency situations. These communication devices allow fire guards to quickly relay important information, such as the location of a fire or any hazards they may encounter, to ensure a swift and coordinated response. The walkie-talkies enable real-time communication, while bullhorns can be used to amplify instructions or warnings to a larger group of people. By having these communication tools, fire guards can enhance their effectiveness in managing and responding to fires or other emergencies.Rate this question:
-
6.
The Fire Guard must wait for the Fire Fighter unit to arrive:
-
A.
When an exterior alarm pull station is used
-
B.
When an interior alarm pull station is used
-
C.
When sprinkler systems are used
Correct Answer
A. When an exterior alarm pull station is usedExplanation
When an exterior alarm pull station is used, the Fire Guard must wait for the Fire Fighter unit to arrive because it indicates that there is a potential fire emergency outside the building. The exterior alarm pull station is typically located near exits and is used to activate the fire alarm system. The Fire Guard needs to wait for the Fire Fighter unit to arrive in order to assess the situation, provide necessary assistance, and coordinate evacuation procedures if required.Rate this question:
-
7.
An exit aisle must be maintained at least:
-
A.
7 feet wide
-
B.
5 feet wide
-
C.
3 feet wide
Correct Answer
C. 3 feet wideExplanation
An exit aisle must be maintained at least 3 feet wide to ensure that there is enough space for people to safely evacuate in case of an emergency. This width allows for easy movement and minimizes the risk of congestion or blockage during an evacuation. It also provides enough room for individuals with mobility devices or disabilities to navigate through the aisle comfortably.Rate this question:
-
8.
All components of the alarm system must be tested:
-
A.
Daily
-
B.
Monthly
-
C.
Yearly
-
D.
Semiannually
Correct Answer
D. SemiannuallyExplanation
The alarm system should be tested semiannually to ensure its proper functioning. Testing the system on a regular basis helps identify any potential issues or malfunctions that may arise. Semiannual testing strikes a balance between frequent testing and not overburdening the system with excessive testing. It allows for enough time to pass between tests to observe any changes or developments in the system's performance. By conducting semiannual tests, any necessary repairs or maintenance can be promptly addressed, ensuring the alarm system's reliability and effectiveness in case of emergencies.Rate this question:
-
9.
Class C fire extinguishers are used for:
-
A.
Woodfire
-
B.
Metal fire
-
C.
Electrical fire
-
D.
Flammable liquids
Correct Answer
C. Electrical fireExplanation
Class C fire extinguishers are specifically designed to extinguish fires involving electrical equipment. These fires are caused by electrical faults or malfunctions, and using water or other conductive extinguishing agents can be dangerous. Class C fire extinguishers contain non-conductive agents, such as carbon dioxide or dry chemical powder, which can safely extinguish electrical fires by removing the oxygen and heat elements. Therefore, when faced with an electrical fire, using a Class C fire extinguisher is the appropriate choice to effectively and safely put out the fire.Rate this question:
-
10.
A replacement supply of extra sprinkler heads must be kept on premises of:
-
A.
6 extra sprinkler heads and wrench
-
B.
3 extra sprinkler heads and wrench
-
C.
4 extra sprinkler heads and wrench
Correct Answer
A. 6 extra sprinkler heads and wrenchExplanation
The correct answer is 6 extra sprinkler heads and wrench. This is because having more extra sprinkler heads ensures that there are enough replacements in case any sprinkler heads malfunction or break. Additionally, having a wrench allows for easy installation and replacement of the sprinkler heads.Rate this question:
-
11.
Fireguards must visually examine the fire extinguishers:
-
A.
Weekly
-
B.
Monthly
-
C.
Semiannually
-
D.
Daily
Correct Answer
D. DailyExplanation
Fireguards must visually examine the fire extinguishers daily to ensure that they are in proper working condition and ready to be used in case of a fire emergency. Daily inspections allow fireguards to identify any visible damage or signs of tampering, such as missing pins or broken seals, that may render the extinguishers ineffective. By conducting these regular visual checks, fireguards can promptly address any issues and ensure that the fire extinguishers are always in a state of readiness.Rate this question:
-
12.
The OS&Y valve controls:
-
A.
The fire alarms
-
B.
The sprinkler system
-
C.
The main supply of water
Correct Answer
C. The main supply of waterExplanation
The OS&Y valve controls the main supply of water. This valve is typically used in plumbing systems to regulate the flow of water. By opening or closing the valve, the main supply of water can be controlled, allowing water to flow or stopping it completely. This is essential for managing water supply in buildings and ensuring that water is available when needed and can be shut off in case of emergencies or maintenance.Rate this question:
-
13.
The OS&Y valve should be sealed in what position:
-
A.
Closed
-
B.
Open
-
C.
Locked
Correct Answer
B. OpenExplanation
The OS&Y (Outside Screw and Yoke) valve should be sealed in the open position. This type of valve has a rising stem that moves up and down as it opens or closes. When the valve is in the open position, the stem is fully extended, indicating that the valve is open and allowing the flow of fluid or gas. Sealing the valve in the open position ensures that there is no obstruction in the flow path and allows for the efficient operation of the valve.Rate this question:
-
14.
Both the sprinkler and standpipe systems must be inspected:
-
A.
Daily
-
B.
Weekly
-
C.
Annually
-
D.
Monthly
Correct Answer
D. MonthlyExplanation
Both the sprinkler and standpipe systems must be inspected monthly. This regular inspection ensures that these systems are in proper working condition and ready to be used in case of a fire emergency. Monthly inspections allow for timely detection and resolution of any issues or malfunctions, minimizing the risk of failure during an actual fire event. Additionally, regular inspections help to comply with safety regulations and maintain the overall effectiveness and reliability of the sprinkler and standpipe systems.Rate this question:
-
15.
Flammable materials must be stored:
-
A.
In a locked enclosure
-
B.
In an outdoor enclosure
-
C.
In an open enclosure
Correct Answer
B. In an outdoor enclosureExplanation
Flammable materials must be stored in an outdoor enclosure to minimize the risk of fire hazards. Storing them in a locked enclosure could be dangerous in case of a fire, as it may restrict access for emergency responders. An open enclosure would also be unsafe, as it could allow the materials to be exposed to potential ignition sources or extreme weather conditions. Therefore, storing flammable materials in an outdoor enclosure provides a controlled environment that reduces the likelihood of accidents and ensures the safety of individuals and property.Rate this question:
-
16.
A Fireguard is required in a location with the public assembly of more than:
-
A.
25 people
-
B.
75 people
-
C.
65 people
-
D.
5 people
Correct Answer
B. 75 peopleExplanation
A Fireguard is required in a location with the public assembly of more than 75 people. This is because when there is a large gathering of people, the risk of a fire breaking out increases. A Fireguard is responsible for monitoring the area, ensuring that fire safety measures are in place, and taking immediate action in case of a fire emergency. Having a Fireguard in such situations helps to ensure the safety of the people present and minimize the potential damage caused by a fire.Rate this question:
-
17.
Exits must be clearly identified with signs that are:
-
A.
Red
-
B.
Off
-
C.
Illuminated
-
D.
Marked exit
Correct Answer
C. IlluminatedExplanation
Exits must be clearly identified with signs that are illuminated. This ensures that they are easily visible in both well-lit and low-light conditions, providing clear guidance to people in case of an emergency. Illuminated signs are particularly important in situations where there may be smoke, darkness, or power outages, as they help individuals locate the nearest exit quickly and safely.Rate this question:
-
18.
Walkie-talkies must be inspected:
-
A.
Weekly
-
B.
After each patrol
-
C.
Monthly
-
D.
Before each patrol
Correct Answer
D. Before each patrolExplanation
Walkie-talkies must be inspected before each patrol to ensure that they are in proper working condition and ready to be used. Inspecting the walkie-talkies before each patrol allows any potential issues or malfunctions to be identified and addressed beforehand, minimizing the risk of communication failure during the patrol. This regular inspection also helps to maintain the overall effectiveness and reliability of the walkie-talkies, ensuring that they are always ready for use in critical situations.Rate this question:
-
19.
A special permit is required for performances with:
-
A.
More than 75 people
-
B.
Open flames
-
C.
Flammable liquids
Correct Answer
B. Open flamesExplanation
Performances with open flames require a special permit because they pose a higher risk of fire hazards and safety concerns. Open flames can easily spread and cause significant damage if not properly controlled. Therefore, a permit is necessary to ensure that safety measures are in place, such as fire extinguishers, fireproof materials, and trained personnel to handle any emergencies that may arise. This permit requirement helps to protect both the performers and the audience from potential harm.Rate this question:
-
20.
During performances, a Fireguard must be positioned:
-
A.
In the main audience
-
B.
In the wings
-
C.
At the door
Correct Answer
A. In the main audienceExplanation
A Fireguard must be positioned in the main audience during performances to ensure the safety of the audience members. By being present in the main audience area, the Fireguard can quickly respond to any potential fire hazards or emergencies, such as spotting smoke or flames and alerting the necessary authorities. This allows for a swift and efficient evacuation if needed, minimizing the risk to the audience and ensuring their safety.Rate this question:
-
21.
If anopen flame is used during a performance, a fireguard must be positioned:
-
A.
In the main audience
-
B.
In the wings
-
C.
At the door
Correct Answer
B. In the wingsExplanation
During a performance, if an open flame is used, it is necessary to position a fireguard in the wings. This is because the wings area is located offstage, behind the main performance area. By placing the fireguard in the wings, it ensures that any potential fire hazards or accidents related to the open flame are contained and do not pose a risk to the main audience or spread to other areas of the venue. The fireguard acts as a safety measure to prevent any potential fire incidents from escalating and causing harm.Rate this question:
-
22.
Fire alarm pull stations are usually positioned at:
-
A.
The hallway
-
B.
Natural exits
-
C.
Inside the building
Correct Answer
B. Natural exitsExplanation
Fire alarm pull stations are usually positioned at natural exits because these locations provide the most direct and accessible route for people to exit the building in case of a fire emergency. Placing the pull stations at natural exits ensures that they are easily visible and reachable, allowing individuals to quickly activate the alarm system and alert others to evacuate. This strategic placement helps to minimize confusion and delays in the event of a fire, maximizing the safety of building occupants.Rate this question:
-
23.
Serious defects must be reported to:
-
A.
The supervisor
-
B.
The fire department
-
C.
The fire safety director
Correct Answer
B. The fire departmentExplanation
Serious defects must be reported to the fire department because they are equipped and trained to handle emergency situations related to fire safety. They have the necessary expertise and resources to address serious defects and ensure the safety of the building and its occupants. The supervisor may not have the specialized knowledge or authority to handle such issues, while the fire safety director may be responsible for overall fire safety management but may not have the immediate capacity to respond to serious defects. Therefore, the fire department is the most appropriate authority to report serious defects to.Rate this question:
-
24.
A daily inspection log must include:a). The number of inspections conducted.b). Any defects discovered.c). The name of the fireguard who conducted the inspections and
-
A.
Fire safety violations
-
B.
The number of sprinklers inspected.
-
C.
Number of pull boxes tested
Correct Answer
A. Fire safety violationsExplanation
A daily inspection log must include fire safety violations to ensure that any potential hazards or violations of fire safety regulations are documented and addressed. This helps in maintaining a safe environment and allows for necessary corrective actions to be taken. By including fire safety violations in the inspection log, it becomes easier to track and monitor any recurring issues or patterns, enabling the implementation of preventive measures to mitigate the risks associated with fire hazards.Rate this question:
-
25.
All trash must be removed:
-
A.
Daily
-
B.
Hourly
-
C.
Weekly
Correct Answer
A. DailyExplanation
In order to maintain cleanliness and hygiene, it is necessary to remove trash on a daily basis. Daily removal of trash prevents the accumulation of waste, reduces the chances of pests and insects infestation, and helps in maintaining a clean and healthy environment. Removing trash daily also ensures that any perishable or smelly waste is promptly disposed of, preventing unpleasant odors and potential health hazards. Therefore, daily removal of trash is the most appropriate and effective option.Rate this question:
-
26.
The fire department must be notified immediately:
-
A.
When log entries are completed
-
B.
Flammable materials are stored
-
C.
A leak in sprinkler system is found
Correct Answer
C. A leak in sprinkler system is foundExplanation
When a leak in the sprinkler system is found, it is crucial to notify the fire department immediately. Sprinkler systems are designed to suppress or extinguish fires, and any malfunction or leak in the system can compromise its effectiveness. A leak in the sprinkler system could indicate a potential fire hazard or an ongoing fire that needs urgent attention. Therefore, notifying the fire department promptly allows them to assess the situation, take appropriate measures, and prevent any potential fire incidents or damage.Rate this question:
-
